Learn how to remove, sand and stain a piece of w d furniture

How to Refinish W d Furniture

Linked To

You really like, or a tired thrift-store find with loads of potential, give it new life with a fresh coat of stain if you have a piece of w den furniture. Refinishing is definitely an simple, low-cost way to draw out natural beauty in lumber furniture and make fine details shine.

After clear finish, let your finished piece fully cure in a warm, dry, well-ventilated area all day and night before use. Your options for staining are limitless. Regardless of what color you ch se, youll give new life to a classic furniture piece.

Apply Stripper

For tiny projects, aerosol spray paint stripper is truly convenient since it’s recon gay dating easy to control and won’t spill. Spray the stripper evenly on the surface and allow it to stay for 5 to ten full minutes. You’ll see the old finish start to carry up off the w d.

For tiny projects, aerosol spray paint stripper is actually convenient because its simple to control and wont spill. Spray the stripper evenly on the surface and allow it stay for 5-10 minutes. Youll start to see the finish that is old to carry up off the lumber.

For tiny projects, aerosol spray paint stripper is truly convenient because its simple to control and wont spill. Spray the stripper evenly on the area and allow it sit for 5-10 minutes. Youll start to see the finish that is old to carry up from the w d.

Eliminate Old Finish

Make use of scraper device to get rid of the old finish. Wipe the blade having a shop that is disposable between scrapes. You may need to use stripper and scrape more than once to be able to eliminate the most of the old finish.

Next use your scraper t l to remove the old finish. Wipe the blade with a shop that is disposable between scrapes. You may need to use stripper and scrape over and over again in order to remove the majority of the finish that is old. As s n as youre done stripping and the area is dry, wipe with mineral spirits employing a clean cloth to eliminate any recurring stripper. Permit the dining table to fully dry before going on to sanding.

Clean With Mineral Spirits

As s n as you’re done stripping and the area is dry, wipe with mineral spirits utilizing a clean fabric to get rid of any recurring stripper. Let the dining table to dry fully before moving on to sanding.

Next usage your scraper device to get rid of the finish that is old. Wipe the blade with a shop that is disposable between scrapes. You may have to apply stripper and scrape more often than once in order to remove the most of the old finish. As s n as youre done stripping plus the surface is dry, wipe with mineral spirits utilizing a clean fabric to remove any stripper that is residual. Enable the table to fully dry before going on to sanding.

Sand Soft

To remove the very last bits of finish, make use of a palm sander with medium-grit sandpaper (about 150-grit) until you begin to see the bare lumber. Then switch to fine sandpaper (200+ grit) before the entire piece is uniform.

To get rid of those last bits of finish, palm sand with medium sandpaper (150 grit) before you see the w d that is bare. Then change to sandpaper that is fine200+ grit) until the entire piece is uniform. Rub down the entire surface with a tack fabric to remove any dust from sanding.

Remove Sanding Residue

Wipe down the whole area with a tack cloth to eliminate any dirt from sanding.

To remove those final items of finish, palm sand with medium sandpaper (150 grit) until such time you understand w d that is bare. Then change to sandpaper that is fine200+ grit) before the entire piece is uniform. Wipe down the whole area with a tack cloth to remove any dirt from sanding.

Apply Stain

Staining is easiest to do with a staining pad. Dip the pad into the stain and wipe it in using long, even shots.

Remove Excess Stain

Then use a clean wiping fabric to remove stain that is excess. Rub gently with the grain to prevent streaking. You’ll need certainly to use numerous coats until you prefer the color. Keep following the exact same process but make sure to let the stain dry between coats it l ks like before deciding whether to add another coat so you can gauge what.

Then work with a clean wiping cloth to remove stain that is excess. Wipe gently because of the grain in order to avoid streaking. Youll need certainly to apply coats that are multiple you want along with. Keep following the exact same procedure but make sure to allow the stain dry between coats it l ks like before deciding whether to add another coat so you can gauge what.

Apply Clear Coat

Once your last coating of stain is wholly dry, use an oil-based coat that is clear a last layer of sheen and protection. Spray-on clear coat is not hard to use and provides great protection. Spray by having a nice consistent motion following the normal lines for the piece. Apply two coats, sanding in between with 200-grit or more sandpaper after the coat that is first dry. This method will sm th any imperfections from your very first layer and provide you with a pro-grade finish. Then spray on a layer that is final.

Once your final coating of stain is totally dry, use an oil-based clear coating for a final layer of sheen and security. Spray-on clear coat is easy to use and offers coverage that is great. Spray with a nice consistent motion following the natural lines for the piece. Apply two coats, sanding in between with 200 grit or higher sandpaper after the coat that is first dry. This method will sm th any imperfections from your own first layer and provide you with a pro grade finish. Then spray on a final layer.

Let Dry

After clear coating, allow your completed piece cure fully in a warm, dry, well-ventilated area every day and night before use. Your options for staining are unlimited. No matter what color you ch se, you’ll give life that is new a vintage piece of furniture.

It’s not hard to bring out the beauty of lumber furniture having a brand new finish. Stain shows the grain and lets the main points of one’s lumber furniture shine through.